Skip to main content

Indoor/Outdoor Pipe and Tank Insulation for the Oil and Gas Industry

DRAGON JACKET MEETS THE NEEDS OF THE OIL & GAS INDUSTRY HEAD-ON WITH A PRODUCT THAT IS BUILT TOUGH AND DESIGNED FOR SAFETY

In industries and applications where insulation failure is not an option, Dragon Jacket Insulation is your best option. Designed to be tough, efficient, and safe, our products withstand extreme conditions, removal and reinstallation, and frequent inspection without breaking down.

Download the One Sheet

From pipelines to storage tanks and vessels, the Oil & Gas industry relies on simple, safe, and effective products because, in this environment, there is no margin for error.

Fiberglass and cladding insulation break down quickly in above and below-ground operating environments. Standard insulation does NOT provide the 100% waterproof and CUI resistance the oil & gas industry requires. See below how Dragon Jacket Insulation is better, and it comes with a 5-Year Warranty.

OTHER INSULATION OPTIONS JUST DON’T COMPARE

Dragon Jacket Insulation™Polyiso Fabricated Panel SystemFiberglass & Cladding
5-Year Warranty
Waterproof
CUI Resistant
95+ MPH Wind Resistant
Extended 20+ Year Life
Impact Resistant
Uninstall, Inspect, Re-Install
UV Resistant**
REQUEST A DEMO

An Easy Installation is a Safe Installation

With Dragon Jacket, there is no additional cladding required, so our products install an average of 16-times faster than our competitors. Plus, our insulation is easy to remove, inspect pipes or components, and then re-install in minutes using standard tools and onsite personnel.

  • No “tradecraft” training is required for installation.
  • No cladding is required. Our 100% water, chemical, and oil-proof polyurea encapsulation is the true “one and done” insulation solution.
  • Support is at your fingertips with our series of easy-to-understand online training videos.
  • All parts are palletized and coded for easy transfer and fast, accurate placement.
Installation Comparison

THERMAL STABILITY

Extreme heat and cold can be disastrous for oil and gas equipment. Dragon Jacket Insulation maintains a static R-value, providing the thermal stability that is essential for storing and transporting oil and gas.

100% WATERPROOF

98% of insulation failures are moisture-related. Dragon Jacket pipe and tank insulation keeps water out, even if the insulation material is cut and the foam core is exposed.

Choose Dragon Jacket Insulation to:
    1. Mitigate energy loss, lower energy costs, and reduce greenhouse gas emissions.
    2. Stabilize process controls against temperature fluctuations, which can contribute to degradation and expensive quality control issues.
    3. Minimize safety hazards by reducing exposure to hot/cold surfaces.

STATIC R-VALUE
12.53 Per 2 Inches

STATIC K-FACTOR
0.174 BTU-IN/HR-FT2-F

OPERATING TEMPERATURE RANGE
-60˚F to +350˚F
DEPENDING ON COATING

100% Waterproof

Oil, Chemical, and UV Resistant

Mitigates CUI

No Corrosion Under Insulation

Thermal Stability

Energy, Process & Cost Efficiency

Fast, Easy Installation

Using Standard Tools & Personnel

Durable & Reusable

20+ Year Lifespan

Built-In Pest Control

100% Encapsulated & Impenetrable